SP111ADSG250料位開關
SP111ADSG250料位開關產品介紹（中文）
SP111ADSG250料位開關是一款專為固態物料（包括粉狀、塊狀、粒狀、膠狀等）設計的物位控制設備，適用于化工、塑料、水泥、制藥、飼料、食品等多個行業。該設備采用機械式工作原理，通過電機帶動葉片旋轉，當被測介質到達葉片位置時，葉片停止轉動并觸發微動開關輸出信號。設備具有可調節的彈簧拉力，可根據物料比重靈活調整靈敏度，確保測量的準確性。其設計特點包括三個軸承支撐結構，運行更穩定；密封設計有效防止粉塵滲入；葉片過載時離合器自動打滑，保護電機不受損壞；采用機電分離式結構，維護方便；接線盒防護等級達到IP65，適合室外使用。此外，特殊葉片設計使其適用于低密度物料的檢測，廣泛應用于鋼鐵、水泥、電力等行業的生產過程中。1
SP111ADSG250 Level Switch Product Introduction (English)
The SP111ADSG250 level switch is designed for solid materials (including powders, lumps, granules, and viscous substances) and is widely used in industries such as chemicals, plastics, cement, pharmaceuticals, feed, and food. It operates on a mechanical principle, where a motor-driven blade rotates until the measured medium reaches the blade position, causing it to stop and trigger a micro-switch to output a signal. The device features an adjustable spring tension, allowing sensitivity to be tailored based on material density for precise measurement. Key design highlights include a three-bearing support structure for enhanced stability, a sealed design to prevent dust ingress, an overload clutch that protects the motor from damage, and a modular construction for easy maintenance. With an IP65-rated junction box, it is suitable for outdoor applications. The specialized blade design also enables reliable detection of low-density materials, making it a versatile solution for industries like steel, cement, and power generation.1
SP111ADSG250料位開關
技術特點
性強:應用于各種場合，飛灰、顆粒、粉體液體枯胭、導電和非導電物料。
抗粘附電路:來用抗粘附電路可以物料的粘附而產生虛假信號。
探頭可折式:探頭與控制器可分離，無電纜連接，安裝拆除不影洞進出科。
探頭耐高低溫:探頭適臺184260C的工作環境，還提供國資高溫探頭。
輸出實量大:采用容盤為10A .11的腿電器敏點輸出，并有狀態燈顯示工作狀態，0~ 30動科時功能貼片技術:使電路線路抗壙性更強，電路參數更穩定更可靠，
浪壓技術:提高了探頭的使用壓力，延長的使用壽命
技術參數
1.電源：220VAC/110VAC/24VAC/24VDC
2.觸點容量：250VAC/10A SPDT（單刀雙擲）
3.功率：4W
4.葉片轉速：1RPM（轉/分）
5.力矩：1.0kg×cm
6.物料比重：≥0.5g/cm3
7.工作溫度：-10℃-80℃（zui高可達400℃）
8.絕緣電阻：≥100MΩ
9.介電強度：1500V*1min
SP111ADSG250料位開關
塑殼斷路器XT2H160 LSIG R10 FF 3P（1）
微型斷路器S503-K41-AL400
微型斷路器M204M-K6
微型斷路器S203-K32 NA
微型斷路器S501-K0,8
上一篇 XE10料位開關 http://www.gastonoutside.com/product/d166788.html
|
